CineFlow 5 6S O4 HD

Description

The CineFlow 5 O4 6S HD is a 5-inch cinematic freestyle BNF drone designed for pilots who want clean DJI O4 footage, strong 6S performance, easy maintenance, and a frame layout with reduced propeller view.

It combines an H-shaped frame design, DJI O4 Air Unit Pro, BLITZ Mini F7 Flight Controller, BLITZ Mini E55R 4-IN-1 ESC, XING2 2207 2050KV motors, pre-installed GPS, quick-release side panels, and a rear-mounted XT60 battery plug with Anti-Spark Filter.

This drone is designed for cinematic freestyle, fast chasing, everyday HD FPV flying, and action-camera use. It is not a complete Ready-to-Fly set and still requires compatible goggles, radio controller, battery, charger, and setup checks before the first flight.

Highlights

Innovative H-Shaped Frame Design
The CineFlow 5 uses an H-shaped frame layout designed to reduce propellers in view while still allowing flexible freestyle handling.

This makes it a practical choice for pilots who want cleaner DJI O4 footage without moving to a larger long-range platform. The design is suitable for cinematic freestyle, action-camera flying, chasing, and smooth HD FPV recording.

Quick-Release Side Panels
The quick-release side panels help protect internal electronics from debris and make maintenance easier. They also help keep the build cleaner by reducing exposed wiring and cable clutter, while still allowing access for inspection, maintenance, and repairs.

DJI O4 Air Unit Pro – HD Recording and Digital FPV
The DJI O4 Air Unit Pro provides high-quality digital FPV video and onboard recording.

With its 1/1.3-inch image sensor, 155° ultra-wide field of view, D-Log M support, RockSteady 3.0+ stabilization, 1080p/100fps live view, and up to 4K/120fps onboard recording capability, the O4 Air Unit Pro is well suited for cinematic freestyle and high-quality FPV footage.

Low Hover Throttle and Strong 6S Performance
The CineFlow 5 is designed for strong 6S performance and efficient hover behavior. The manufacturer states that the CineFlow 5 can achieve down to 17% hover throttle under iFlight laboratory test conditions with a Fullsend 6S 1480mAh 150C battery.

Real hover throttle and flight time depend on battery, payload, propellers, wind, temperature, throttle use, and flying style.

High-Performance BLITZ Mini F7 Stack
The CineFlow 5 uses a BLITZ Mini F7 Flight Controller together with a BLITZ Mini E55R 4-IN-1 ESC. The E55R ESC is designed for high-intensity 6S flying and uses larger MOS components with up to 65A burst current, supporting stable power delivery and improved heat dissipation during demanding maneuvers.

Built-In GPS Module
The CineFlow 5 includes a pre-installed GPS module with protective TPU cover. GPS can support coordinates, telemetry, flight logging, and Betaflight GPS Rescue after correct configuration and testing by the pilot.

Important: GPS Rescue is not enabled by default and must not be treated as a guaranteed return-to-home function. It must be configured, checked, and tested carefully before use.

Rear-Mounted Battery Plug with Anti-Spark Filter
The rear-mounted XT60 battery plug helps with cleaner cable routing and can reduce the risk of battery leads reaching the propellers.

The integrated Anti-Spark Filter helps reduce plug-in spark, protects the XT60 connector from unnecessary wear, and helps reduce sudden voltage and current spikes when connecting the battery.

Front-Mounted DJI O4 Air Unit
The front-mounted Air Unit layout improves cooling access and keeps the DJI O4 Air Unit Pro easier to service. This layout also helps avoid unnecessary coaxial cable replacement during normal maintenance.

Integrated Action Camera Base Mount
The CineFlow 5 includes an integrated action-camera base mount for compatible GoPro-style TPU mounts. This provides a clean mounting position for cinematic footage while keeping the overall design more integrated.

Reinforced Arm Base
The strengthened arm base improves durability in a high-stress area of the frame. This is especially useful for freestyle and chasing flights where the frame may experience higher mechanical loads.

BNF Factory Setup

This drone is delivered as a BNF, which means Bind-and-Fly.

It is assembled, factory configured, and tested before shipment. However, BNF does not mean Ready-to-Fly. The drone still needs to be bound to a compatible radio controller before the first flight.

Before the first flight, check all screws, motor direction, propeller orientation, receiver binding, failsafe behavior, GPS status, video link, OSD, Betaflight modes, and voltage warning settings.

ReadyFly Kits – Complete FPV Sets Available

This product is sold as a BNF drone.

BNF means Bind-and-Fly: the drone is assembled, tuned, and equipped with the selected receiver and DJI O4 video system, but it still needs to be bound to a compatible radio controller before flight.

If you need a complete FPV setup, we also offer ReadyFly Kits or compatible accessory bundles in our shop. These make it easier to combine suitable goggles, radio controller, batteries, charger, propellers, and accessories.

Choose this BNF drone if you already have compatible DJI O4 FPV equipment and a matching radio system.

Choose a ReadyFly Kit or accessory bundle if you want a more complete FPV setup.

Required to Fly

This is a BNF drone, not a complete ReadyFly Kit.

You also need:

• Compatible DJI FPV goggles
• Compatible radio controller matching the selected receiver version
• Suitable 6S battery
• 6S-compatible LiPo balance charger
• microSD card for onboard recording, if required

Not included with the BNF drone:

• Battery
• Charger
• FPV goggles
• Radio controller
• microSD card
• Action camera

Choose the Correct Receiver Version

Please choose the receiver version that matches your radio controller.

Available receiver versions:

• For DJI FPV Controller 2 & 3
• TBS Crossfire NANO RX
• ELRS 2.4GHz RX
• ELRS 868/915MHz RX

The DJI O4 Air Unit Pro is responsible for video transmission. The selected receiver/control version determines how the drone receives control commands from your radio controller.

DJI Controller Version
Choose the DJI Controller version if you want to control the drone with DJI FPV Remote Controller 2 or DJI FPV Remote Controller 3.

This version is configured for DJI SBUS control. The DJI Controller version does not have an additional ELRS or Crossfire receiver.

Important: The DJI Controller version is intended for DJI remote control use. If you want to use ELRS or TBS Crossfire later, a separate receiver must be installed and configured correctly. This may require wiring changes, disconnecting DJI SBUS, or using another UART.

ELRS 2.4GHz Version
Choose this version if you use an ELRS 2.4GHz radio controller, for example an iFlight Commando 8 or Commando 14 ELRS 2.4GHz.

ELRS 868/915MHz Version
Choose this version only if your radio controller or external module supports ELRS 868/915MHz.

ELRS 2.4GHz and ELRS 868/915MHz are not compatible with each other.

TBS Crossfire Version
Choose this version if you use a TBS Crossfire radio system or a compatible Crossfire module. 

If you are not sure which version matches your radio controller, please contact us before ordering.

Product Images and Variant Notice

Product images are for display and reference only. Some images may be generic manufacturer photos and may not show the exact antenna layout, receiver antenna length, battery mounting, GPS position, props, side-panel details, or small details of every available variant.

The final configuration depends on the selected receiver version, production batch, and product variant.

Battery Recommendations

This drone is designed for 6S batteries.

Most pilots use batteries between 1380mAh and 2400mAh.

Freestyle / responsive flying:

6S 1380–1550mAh LiPo with high discharge rate

Cinematic / GoPro-style flying:

6S 1550–1850mAh LiPo with high discharge rate

Longer smooth cruising:

6S 1850–2400mAh LiPo with high discharge rate

Maximum endurance / smooth cruising only:

DOGCOM 6S1P 4000mAh Li-Ion

DOGCOM 6S1P 5000mAh Li-Ion

Important Li-Ion Note:

Li-Ion batteries are recommended only for smooth cruising and endurance-oriented flying. They are not suitable for aggressive freestyle, racing, repeated punch-outs, or high-current flying.

Li-Ion batteries behave differently from LiPo batteries and may require adjusted Betaflight voltage warnings.

Action Camera Support

The CineFlow 5 has an integrated action-camera base mount and can carry a GoPro or similar action camera when a compatible TPU mount is used.

Adding an action camera increases takeoff weight, changes flight behavior, increases current draw, and usually reduces flight time.

Recommended Accessories

Default Propeller: Nazgul F5 Tri-Blade Prop

Optional Propeller: GEMFAN Hurricane MAX 51377 Prop for Nazgul

Freestyle Battery: DOGCOM 6S 1550mAh 150C Ultra Series Battery

Cinematic Battery: DOGCOM 6S 1850mAh 150C Battery

Longer Cruising Battery: DOGCOM 6S 2200mAh 150C Battery

Maximum Endurance: DOGCOM 6S1P 5000mAh Li-Ion Battery

Charger: HOTA D6 Pro 650W 1–6S Dual Channel AC/DC Smart Charger

GoPro Mount: 2RAW Slim GoPro TPU Mount

TPU Parts: CineFlow 5 TPU Parts

ND Filters: iFlight O4 Air Unit Pro ND Filters

Technical Specifications

Product Name: CineFlow 5 O4 HD BNF

Product Type: 5-inch BNF cinematic freestyle FPV drone

Recommended Skill Level: Intermediate to experienced FPV pilots

Video System: DJI O4 Air Unit Pro

Receiver Options: DJI FPV Controller 2 & 3, TBS Crossfire NANO RX, ELRS 2.4GHz RX, ELRS 868/915MHz RX, depending on selected variant

Geometry: H-shaped

Frame Wheelbase: 222mm

Flight Controller: BLITZ Mini F7 Flight Controller

ESC: BLITZ Mini E55R 4-IN-1 ESC

ESC Burst Current: up to 65A, manufacturer-stated

Motor: XING2 2207 2050KV

Propellers: Nazgul F5 Propellers

Battery Input: 6S

Recommended Battery Type: 6S LiPo

Common LiPo Battery Range: 1380mAh–2400mAh

Li-Ion Compatibility: 6S1P 4000mAh / 5000mAh Li-Ion only for smooth cruising

Dimensions: 213 × 209 × 42mm

Weight: approx. 499g ±5g without battery

Approx. Takeoff Weight: approx. 741g ±5g with 6S 1400mAh battery

Maximum Speed: approx. 190km/h

Maximum Takeoff Altitude: approx. 7000m

Maximum Hover Time: approx. 12 minutes, manufacturer-stated value

Maximum Flight Distance: approx. 5km, manufacturer-stated value

Maximum Wind Resistance: Level 7, manufacturer-stated

Operating Temperature Range: -20°C to 40°C

Antennas: Dual DJI O4 antennas plus receiver antenna depending on selected receiver version

GPS: Pre-installed

GNSS