IFlight BLITZ ATF435 Flight Controller – MyFPV

Description

iFlight BLITZ ATF435 Flight Controller (ArteryTek F435)

The iFlight BLITZ ATF435 Flight Controller ushers in a new era of performance and value. Equipped with a powerful ArteryTek AT32F435 MCU and a modern BMI270 gyro, this controller sets a new standard for efficiency and reliability. It’s the perfect choice for pilots seeking a dependable, feature-rich, and high-performance flight control experience without breaking the bank.

The ArteryTek Advantage

This flight controller is based on the innovative ATF435 MCU by ArteryTek, a powerful alternative to traditional STM32 chips. With performance comparable to an F722 processor, the ATF435 delivers incredible processing speed at an unmatched price-performance ratio. It’s the smart choice for a powerful and efficient FPV drone build.

Ready for Any Build: Digital or Analog

The BLITZ ATF435 is packed with connectivity for any modern build. It boasts 6 hardware UARTs for all your peripherals and a robust dual BEC system. The dedicated 9V/2A BEC is perfect for providing clean, stable power to a DJI O3, Vista, or other digital FPV system, while the 5V/2.5A BEC handles your receiver, GPS, and other accessories.

Key Features:

• Powerful ArteryTek AT32F435 MCU: Delivers F7-class performance and processing speed at an incredible value.
• High-Performance BMI270 Gyro: A modern, low-noise gyro provides the clean data needed for a locked-in feel and easier tuning.
• Full 6 Hardware UARTs: Massive connectivity for your receiver, VTX control, GPS, and other peripherals without compromise.
• Massive 32MB Onboard Blackbox: Provides ample high-speed data logging for professional-level tuning without needing an SD card.
• Digital HD Ready: A dedicated 9V/2A BEC provides the clean power needed for DJI and other digital FPV systems.
• Plug-and-Play Ready: An 8-pin harness port makes connecting to a compatible 4-in-1 ESC clean and simple.

Specifications:

• MCU: AT32F435CGU7
• Gyro: BMI270
• Barometer: DPS310
• OSD Chip: AT7456E
• Flash: 32MB (Blackbox flash)
• UARTS: 6
• Input Voltage: Up to 6S LiPo
• Motor outputs: 4x (SH1.0 connector)
• BEC: 5V 2.5A / 9V 2A
• Firmware target: IFLIGHT_BLITZ_ATF435
• Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
• Dimensions: 36.5*35 mm
• Weight: 7.8g

Includes:

• 1x iFlight Blitz ATF435 Flight Controller
• 1x Set of FC connector cables
• 1x Set of silicon mounting grommets