Description
HappyModel Mobula6 1S BNF Whoop Drone – ELRS (19000kv)
Check out all of our other HappyModel products! Also, take a look at our selection of Pre-Built Drones!
Features
- Built-In ExpressLRS Receiver Options
- 1S 65mm Brushless HD Whoop
- Compatible with 1S Lipo/LIHV
- RunCam Nano 3 Camera
- Adjustable Camera Angle
- Smooth and Agile Flight
Specifications
- Item Name: Mobula6 ELRS 1S 65mm Brushless whoop drone BNF version
- Frame Color: 2.4GHZ- Green
- Size: 80x80mx7mm
- Brand: Happymodel
- Wheelbase: 65mm
- Weight: 18.7g
- Voltage:1S
MOTOR
- Motor Dimensions: 9.5x14mm
- No.of Cells (Lipo): 1S only
- Model: SE0802 KV19000
- Stator Diameter: 7mm
- Configuration: 9N12P
- Shaft Diameter: 1mm
- Stator Length: 2mm
- Weight: 1.46g
PROPELLERS
- Center Hole Inner diameter: 1.0mm
- Prop Disk Diameter: 31mm
- Center Thickness: 5mm
- HQprop31mm
- Weight:0.2g
FC
- ELRS F4 2G4 flight controller built-in SPI expresslrs 2.4G receiver
- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Power supply: 1S battery input (DC 2.9V-4.35V)
- Sensor: MPU-6000(SPI connection)
- Built-in Betaflight OSD(SPI Control)
- Center Hole Inner diameter:1.0mm
- Board size: 28.5 * 28.5MM
- Prop Disk Diameter:31mm
- Built-in voltage detection
- Center Thickness:5mm
- Built-in 5V 1A BEC
- Built-in 5.8G VTX
- Weight:0.2g
ONBOARD 4-in-1 ESC
- Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
- Factory firmware: O_H_5_REV16_7.HEX
- Support BLHeliSuite programmable
- MCU upgraded to EFM8BB21
- Default protocol: DSHOT600
ONBOARD 5.8GHZ VTX
- Frequency: 5.8GHz 5bands 40 channels
- Current consumption: 300mA(type)
- With Race bandSmartaudio ready
- Output power: 25mw-200mw
- Input voltage: 3.3V 5.5V
- Frequency: 40CH
RUNCAM NANO 3 CAMERA
- Signal System: PAL/NTSC Non-Switchable
- Dimensions: L14mm*W14mm*H9mm
- Current: 110mA@5V [email protected]
- Min. Illumination: [email protected]
- Horizontal Resolution: 800TVL
- Electronic Shutter Speed: Auto
- Auto Gain Control (AGC): Auto
- Lens : 2.1mm(M8) FOV 160°
- Image Sensor: 1/3″ CMOS
- Model: RunCam Nano 3
- Housing Material: ABS
- Power:DC 3-5.5V
- S/N Ratio: >50dB
- Net Weight: 1.2g
- Day/Night: Color
- D-WDR: Auto
BATTERY
- Continuous Discharge Rate: 30C
- Weight: 8gConnector: PH2.0
- Size: 57mmx12mmx7mm
- Capacity:300mAh
- Voltage:3.8v
Includes
- 1x Happymodel Mobula6 1S 65mm Brushless Whoop w/ RunCam Nano 3 – ELRS (2.4GHz)
- 1x HQProp 31mm Bi-Blade Propeller (Set of 4)
- 4x 1S 300mAh 30C LiHV Battery
- 1x 1S Lipo/LIHV USB Charger
- 1x Screwdriver
- 1x Prop Tool
Reviews
There are no reviews yet.