BrotherHobby Tornado T7 4215 Motor X Class(CW) 380/520/680/800KV FPV Drone Motor

Description

SpecificationsKV: 380KV/520KV/680KV/800KVBase casing: AI 7075Stator: 0.2mm Kawasaki silicon steelConfiguration: 12N14PProp Adapter Shaft Thread: M6Shaft: Titanium Alloy hollow shaftNo.of Cells(Lipo): 6-12SBolt Pattern: M4(30X30mm)Bearings: Japanese NMB 17X6X6Rotor: N52H arc MagnetWeight: 215g with 75cm SR wiresWire AWG: 14#.750mm LengthBell cap: AI 7075

UR 14AWG specification for a 380KV tri-blade motor: in ambient temperatures ranging from 29°C (44.3°F) at 21.5°. with specifications including a maximum current draw of 9072mA. voltage of 3860V. power output of 954.6W. and efficiency rating of 4.04%. At higher temperatures. the performance is as follows: 44.2°C (112.54°F) at 43.4° with a maximum current draw of 6110mA. voltage of 1918.28V. power output of 2368.17W. and efficiency rating of 3.19%. At 100% temperature. the performance is as follows: 44.1°C (53.7°F) at 43.4° with a maximum current draw of 6940mA. voltage of 11963V. power output of 2368.17W. and efficiency rating of 2.93%.

Specifications for ESC (Electronic Speed Controller):* Maximum power: 1821.25 watts* Propeller size: 13 inches* Maximum current draw: 77.5 amps* Hipot test results: + AC PASS (passed)* Dynamic balance standards met* Impulse winding test results: PASS* Load data requirements: + Throttle voltage: insert value + Current: insert value + Thrust efficiency: insert value + Copper wire item number: insert value* RPM: insert value* Thrust (in grams): insert value* Input power (in watts): 600* Temperature range: 24.0°CNote that I assumed the original sentence was describing various specifications and test results for an Electronic Speed Controller (ESC) used in a drone motor. If this is not correct. please let me know and I can try rewriting the sentence in a different way.