Speedy Bee F405 V4 55A BLHeli_S 30×30 Stack

Description

** Discontinued – New Version Here **

The Speedy Bee F405 V4 55A BLHeli_S 30×30 Flight Controller and ESC Stack include all the features a user would expect from a modern flight controller and ESC stack at an incredible price. The flight controller features the STM32F405 MCU, onboard 4-level battery life indicator, Micro-SD card slot for Blackbox logging, 4 groups of LED strip pads, DJI plug for digital quads, dual gyroscope power supply filtering, dual 5V & 9V BECs with up to 3A output, barometer, support for up to 8 motors, and built-in Bluetooth and WiFi for wireless configuration through the SpeedyBee App. The 55A 4-In-1 ESC now comes in an aluminum alloy heat sink for better heat dissipation and durability, features a built-in TVS protective diode, Japan-made TDK SMT capacitors, and even comes with a low ESR 1000uF capacitor.

Specifications:

F405 V4 30×30 FLIGHT CONTROLLER

• MCU:  STM32F405
• IMU(Gyro):  ICM42688P
• USB Port:  Type-C
• Barometer:  Built-in
• OSD Chip:  AT7456E Chip
• BLE Bluetooth:  Supported. Used for FC configuration (MSP should be enabled with Baudrate 115200 on UART4)
• WiFi:  Supported
• DJI Air Unit:  Two Ways:  6-pin plug or direct solder
• Supports DJI O3/RunCam Link/Caddx Vista/Air Unit V1
• Blackbox Micro SD Card:  Use SDSC or SDHC under 32GB
• Current Sensor Input:  Supported
• Power Input:  3S-6S LiPo
• 5V Output:  9 Groups of pads – Load is 3A
• 9V Output:  2 Groups of pads – Load is 3A
• 3.3V Output:  Supported – Load is 500mA
• 4.5V Output:  Supported – Load is 1A
• ESC Signal:  M1-M4 on bottom, M5-M8 on front
• UART:  6 Sets
• ESC Telemetry:  UART 5
• I2C:  Supported
• LED Pads:  Supported
• Buzzer:  BZ+ and BZ-
• Boot Button:  Supported
• Firmware:  Betaflight, iNav
• Target:  SPEEDYBEEF405V4
• Mounting:  30.5×30.5mm
• Dimensions:  41.6×39.4×7.8mm
• Weight:  10.5g

BLHELI_S 55A 4-IN-1 ESC

• Firmware:  BLHeli_S J-H-40
• Wireless Configuration:  Speedybee App
• Continuous Current:  55A * 4
• Burst Current:  70A (10 seconds)
• TVS Protective Diode:  YES
• External Capacitor:  1000uF Low ESR included
• ESC Protocol:  DSHOT 300/600
• Power Input:  3-6S LiPo
• Power Output:  VBAT
• Current Sensor:  Supported (Scale=400, Offset=0)
• ESC Telemetry:  Not Supported
• Mounting:  30.5×30.5mm
• Dimensions:  45.6*44*8mm
• Weight:  23.5g

Download Manual